PRODUCT RANGE

STANDARD JSW VISHWAS SHEETS

720 mm, 740mm,760mm, 780mm, 800mm

WIDE JSW VISHWAS SHEETS

875mm, 900mm

WIDER JSW VISHWAS SHEETS

1220mm

MAINTENANCE

All roofing and cladding products are exposed to the external factors and effects of weather, dust and other deposits. Like any material that’s exposed to the elements, a little bit of maintenance is always required that will help your steel Roof and Cladding lasts longer.Maintenance involves the following:

REGULAR WASHING

Regular washing every 3 to 12 months (depending on the local environment). This helps to prevent the build-up of dirt, debris or other materials that are not otherwise removed by rain washing.

REGULAR INSPECTION

Regular Inspection of the Wall to ensure non accumulation of dust and other unwanted material

STORAGE AND HANDLING

If colour coated sheets are to be stored for any time prior to forming or installation, they must be stored in dry, well ventilated conditions. Storage which allows water (including condensation) to be trapped between the sheets may damage the coating beyond repair

DO’s
Always keep material in a dry, shaded and good ventilated area, If not required for immediate use, provide cover to protect the material. If Sheets become wet during storage, it should be separated without delay & surface moisture removed with clean cloth. The steel sheets then be stacked so that air circulation completes the drying process. Material to be kept slightly above the ground by using wooden rubber plank.

DON’Ts
Do not keep the material on wet floor (water, rain. etc.), Moisture or water penetration between the sheets through the wooden pallets which causes damage hence to be avoided. Prevent water seepage inside the packed coils and packets. Metal-on-metal contact should be avoided whenever possible. Under no circumstances should the material be stored near or come in contact with salt water, corrosive chemicals, ash, or fumes generated or released inside the building or nearby plants, foundries, plating works, kilns, fertilizer, and wet or green lumber. Do not slide sheet on rough surface or over each other. Contact with water and mud should be strictly prohibited